Myalarm V-LCD1 Manuel d'instructions télécharger pdf (Page 98)

LCD PROGRAMMING - ADD/CHANGE KEYPAD CODES

8-92

System 2 Installation / Programming Manual

Use Up to 4 Digits þþþþ

Enter User [ _ _ _ 0 ]

Enter Door # þþþþ

Press Any Key

Enter Door (0=Done) [ _ _ ]

User Numbers

The first thing to do is enter a user number, not the code number. The user number uniquely

identifies a user and can be thought of as an employee number. In fact, many installers use a

company’s existing employee numbers as user numbers. When the user enters a code, and this

event is printed or displayed on the LCD, it is not the code number that is displayed to identify

the user but the user number. Why? If Keypads are used, it would be a breach of security to

print a user's code where unauthorized individuals may eventually see it.

The LCD will scroll the instructions:

Scrolling Options: 0=Quit

At the Enter User [ _ _ _ 0 ] prompt, enter the desired number followed by a # (enter). If you

wish to select user number 1 simply press 1 and # (enter). You do not need to enter all four

digits here. Remember, this is the user number not the Code Number.

Door Number

This part may seem a bit confusing, so be sure to read this section entirely. Here you are

instructed to enter the door(s) this person will be allowed to access.

The LCD will scroll the instructions:

Scrolling Options: To Grant Access

Reenter Door #

To Deny Access

Simply Press Any Key. The LCD will scroll the instructions:

At the Enter Door (0=Done) [ _ _ ] prompt, enter the first door this user is allowed to access.

Let’s say user #1 is allowed access to doors 1, and 3. Enter 1 and press # (enter).

The LCD will scroll the instructions:

The first line of the LCD will display the door(s) this user is allowed to access.

At the Enter Door (0=Done) [ _ _ ] prompt, enter the next door this user is allowed to access.

If we stick with the sample we would enter a 3 and press # (enter).

1 2 ... 93 94 95 96 97 98 99 100 101 102 103 ... 335 336

Pas de commentaire

Myalarm V-LCD1 Manuel d'instructions Page 98