Myalarm V-LCD1 Manuel d'instructions télécharger pdf (Page 259)

100

101

PC/VDT PROGRAMMING - NETWORK OPTIONS

9-253

System 2 Installation / Programming Manual

Network Options (Option #18)

When you first powered up the unit, (back in the Initialization process) you made the decision to

either “Allow Networking”” or not.

If your System is a Stand-Alone unit (two doors) and you do not wish to program any of the

Network Options, press 0 and ENTER to exit this option.

If your System is going to be used for networking multiple System 2's together, you can now

choose to make this particular unit a “Master” or a “Slave”. The Master unit has the capability

to program all System options.

The VDT will display:

Unit in Standalone Mode

1=Convert to a Slave

2=Convert to a Master

3=Test RS485

0=Quit

Enter Net Option [0]

At the Enter Net Option [ 0 ] prompt, make your selection.

Master Unit

If your unit is configured as a Master, and you enter or re-enter this option, the LCD will scroll:

Unit is a Master

1=Convert to a Slave

2=Configure Network

3=Make Standalone

Enter Net Option [0]

At the Enter Net Option [0] prompt, make your selection.

1 2 ... 254 255 256 257 258 259 260 261 262 263 264 ... 335 336

Commentaires sur ces manuels

Pas de commentaire

Myalarm V-LCD1 Manuel d'instructions Page 259

Commentaires sur ces manuels

Produits connexes et manuels pour Systèmes de contrôle d'accès de sécurité Myalarm V-LCD1