Myalarm V-LCD1 Manuel d'instructions télécharger pdf (Page 74)

LCD PROGRAMMING POWER-UP MESSAGES

8-68

System 2 Installation / Programming Manual

Enter # of Rqrd Events

Required Events [_100]

Enter # of Temp Users

Temporary Users [ __10 ]

1=Yes, 2=No

Allow User Names? [ 2 ]

Required Events

We recommend a history Storage Buffer of at least 100 events - you may choose more or less.

If you choose more, the amount cannot exceed 315 events, unless additional RAM has been

installed and activated. The more events you choose, the fewer users your system can support.

On average, for each additional 3 events (over and above the default 100), you will give up

memory space for about 1 user. See Appendix A for complete details. The LCD will scroll the

following instructions:

Select the desired amount of events you wish the System 2 to store and press #.

Temporary Users

The System 2 allows you to enter temporary users which become active on a given date and are

then automatically deleted on a given date. The maximum number of temporary users that the

system will support must be set at power up. We recommend any number between 10 and 100.

For every ten (10) temporary users, you give up, on average, one user. Again, see Appendix A

for details.

The LCD will scroll the following instructions:

Select the desired amount of temporary users you wish and press #.

Next, you can select if you wish to use names with your System 2. You only should select YES

if you are going to use a Video Display Terminal or Personal Computer. The programming

keypad cannot program any alphanumeric characters.

User Names

More users can be stored in memory if you do not use names. If you select [1], (Yes).

Because storing names requires twice as much memory per user, selecting the name option will

reduce the number of available users by 50%.

Note: When using names for users, a VDT or PC with emulation software is required and you

must activate the RS232 option. You may also purchase additional RAM to allow expansion up

to 6,226 users. The LCD will scroll the following instructions:

Select Yes or No and press #.

1 2 ... 69 70 71 72 73 74 75 76 77 78 79 ... 335 336

Pas de commentaire

Myalarm V-LCD1 Manuel d'instructions Page 74