Myalarm V-LCD1 Manuel d'instructions Page 139

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 336
  • Table des matières
  • DEPANNAGE
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 138
LCD PROGRAMMING - BATCH ENROLL DATA CHIPS
8-133
System 2 Installation / Programming Manual
Use 4 Digits
Enter Seed # [ _ _ _ _ ]
Seed Number
If you do not intend to use Keypads on your system, exit this option and return to Option #5 -
Port Configuration and set all your ports to Card Only.
What is a Seed Number? Here’s an example: You select a seed number of 1000, Batch Enroll
200 users, and use the System for months or years. One day, someone accidentally erases
memory. Now everyone’s codes are erased. No problem! When Batch Enrolling Users again,
simply select Seed Number 1000 again, and the System will assign the identical codes it did
previously, saving you time of issuing new numbers, and users the aggravation of memorizing a
new code number.
The Seed Number must be four digits. Again, you may not use Leading Zero’s.
Note: This prompt will only appear if any of your ports are selected as Keypad Only.
Remember, the system default is for Keypad Only. If you have the network option active and
any of the eight or sixteen ports have not been changed to Card Only (if this is what you
desire), you will have to enter a seed number here.
The LCD may scroll the instructions:
Enter your four digit seed number and press #.
Vue de la page 138
1 2 ... 134 135 136 137 138 139 140 141 142 143 144 ... 335 336

Commentaires sur ces manuels

Pas de commentaire