Myalarm V-LCD1 Manuel d'instructions télécharger pdf (Page 232)

PC/VDT PROGRAMMING - BATCH ENROLL CARDS

9-226

System 2 Installation / Programming Manual

System Function While Batch Loading

IMPORTANT NOTE: The system will not process door inputs while batch loading is in

operation. This means that users entering their codes at a door will not be granted access

while the system is batch loading. For this reason it is important that batch loading be

performed at non-peak times so as to minimize user inconvenience.

While the system is batch loading, the VDT will display:

Please Stand By...

After batch loading is completed, the VDT will display:

Use Up to 4 Digits

0=Quit

First User # [____]

If you wish to batch program additional users, with a different Seed Number enter the desired

first user number followed by ENTER at the First User # [_ _ _ _] prompt. If you

are finished batch programming users press 0 and ENTER.

Memory Full

At some point, you may enter the maximum number of users supported on your version of

System 2. Should this happen, the VDT will display the instructions:

Press Any Key

No More Room!

You now have a decision to make. Either remove any unused codes, or call Corby about

purchasing the memory expansion option. After successfully entering all users, the unit will

return to the Main Menu.

1 2 ... 227 228 229 230 231 232 233 234 235 236 237 ... 335 336

Pas de commentaire

Myalarm V-LCD1 Manuel d'instructions Page 232